12V 24000mAh 4000A portable car Jump Starter with Air Inflator (2 in 1)
Item No.: JS-53
Selling point:
air inflator+ car jump starter(2 in 1)
Product highlights:
24000mAh Big capacity
12V 2000 Amps jump start engine size up to 4.0gasoline
Built-in air inflator
Quick charge input,charging time<3 hours
ABS housing in V0 Anti-fire grade
12V10A Supply power for 12V devices
Reverse -charge Protection: No reverse charging back to CarKu unit After the vehicle started.
Reverse Polarity Protection: No damage happened while the clamps are connected in wrong
terminals.
Short-Circuit Protection: Prevent short-circuit occuring while two clamps are connected.
Over-discharge Protection: Effectively prevent over-discharge of the battery in the jump starter.
Over-charge Protection: Effectively prevent over-charge of the battery in the jump starter.
Over-temperature Protection: Automatically stop working when the temperature is getting too
high.
Jump starter Product Specification
| Battery Capacity |
24000mAh |
| size |
195*93*40mm |
| weight |
1800g |
| Input |
Quick Charge(5V/2.0A) |
| Output |
5V/2.4A, 5V/3A, 9V/2A, 12V/1.5A,5V/3A, 9V/2A; 12V/1.5A; PD 65W, car jump start |
| Jump Starter |
12V |
| max inflation pressure |
150PSI |
| Peak Current |
start current 2000A, peak current 4000A |
| Operating Temp. |
-20ºC~60ºC |
| Lifetime |
>1000cycles |
| Full charging time |
3.5 hours |
| start engine displacement |
gasoline:6.0L |
Air inflator Specification
| Operating voltage |
DC 12V |
| Max pressure |
150PSI |
| Peak current |
2000A |
| Flow |
50L/min |
| Length of air hose |
0.65m |
Jump Start Vehicle Instruction:
1.Make sure that the numbers of indicators is not less than 3 ones.
2.Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery
negative (-) terminal.
3.Start the vehicle.
4.When the vehicle is started, remove the jumper cable from Jump Starter and disconnect RED and BALCK clamps
from the vehicle battery. Leave the vehicle's engine running.
){kind=link}